Gyp-Crete®
The industry standard for use over wood subfloors in multifamily construction. Provides sound and fire control. Its smooth surface is ideal for finished floor goods.

Gyp-Crete 2000®/3.2 K
Achieving strengths up to 3200 psi, designed for use in single-family and light commercial construction. Also ideal for renovation projects. Gyp-Crete 2000/3.2K is now ALWAYS a "Green" building material.

Therma-Floor®
Designed specifically for radiant floor heating systems. Use over hot water tubes or electric cables. Provides the ideal thermal mass, plus fire and sound control. Therma-Floor is now ALWAYS a "Green" building material.

Dura-Cap® Flooring
Ideal for smoothing concrete slabs or precast planks in new or renovation projects. Covers old floor coverings, including vinyl asbestos tile. It can be poured from 3 inches deep to a featheredge. Compressive strengths up to 3,800 psi (26.2 MPa). Dura-Cap is now ALWAYS a "Green" building material.

Commercial Topping®
Poured from a featheredge to 3", in new construction or renovation projects. Achieves compressive strengths of 4000 to 4500 psi and pours over VAT, VCT, terrazzo or ceramic, with no shotblasting required. Commercial Topping is now ALWAYS a "Green" building material.

Level-Right®
A specially formulated, high-strength, cementitious underlayment that can handle any floor leveling challenge - without shotblasting or scarifying. With compressive strengths up to 5,500 psi (38 MPa), it is the perfect solution for problem floors in large projects or for small repair jobs. Level-Right is a "Green" building material.

Level-Right® PLUS
Ideal for thin or thick topping applications over concrete. Levels, smooths and repairs, all with superior speed and a high-strength set. It's the superior solution for 0-1½" (0-38 mm) thick or thin-topping applications. Dries fast to keep your job on schedule.

Level-Right® FS-10
Ideal for thin-topping, 0 - 3/8" (0-10 mm) applications over concrete. Provides a smooth, level new surface that dries fast to keep your job on schedule, and to allow for placement of floor goods soon after application. Attains up to 7200 psi (50 MPa).

Level-Right® WearTop
When old or damaged concrete floors need a second life, Level-Right WearTop provides a new, smooth wear surface - fast. Get the look and strength of new construction, with less time and lower cost.

Level-Right® FeatherEdge
Level-Right^® FeatherEdge is a specially formulated, fast setting, polymer-modified portland cement based patching compound. Mixed with water, it is used for patching over all gypsum underlayments, wood and concrete subfloors. It can be used as an embossing leveler over vinyl, VCT, cement, terrazzo and old adhesives.

Acousti-Mat® II
The low-profile sound control system. Increases IIC levels up to 10 points over wood frame, and up to 20 points over concrete. Increases STC rating 6-15 points over bare wood frame system. Acousti-Mat II is now ALWAYS a "Green" building material with 40% pre-consumer recycled content.

Enkasonic® Sound Control
The original sound control mat. Increases IIC levels up to 12 points over wood frame, and up to 20 points over concrete. Increases STC rating 6-15 points over bare wood frame system. Enkasonic is now ALWAYS a "Green" building material with 40% pre-consumer recycled content.

Acousti-Mat® 3
For super sound control even in open beam, concrete slab and conventional wood frame floor systems. Increases IIC levels up to 17 points over wood frame, and up to 25 points over concrete. Increases STC rating 6-15 points over bare wood frame system. Acousti-Mat 3 is now ALWAYS a "Green" building material with 40% pre-consumer recycled content.

Acousti-Mat® LP
Acousti‑Mat LP can be attached to a concrete subfloor, then topped with a Maxxon Underlayment.  The Acousti‑Mat LP is permanently encased in the underlayment, so when the floor goods are changed the sound control system remains intact. Acousti-Mat LP or LPR can also be installed directly on the concrete or wood subfloor, or on top of a Maxxon Underlayment in wood or steel frame construction for additional sound control and floor flatness. Floor goods such as floating wood, glue-down wood, or tile can be installed directly on top of the Acousti-Mat LP or LPR.

Acousti-Mat® LPR
Acousti‑Mat LPR is an entangled mesh attached to a unique blend of polymeric fibers of various shapes and sizes. The blend of these fibers is a proprietary mix designed to provide excellent reductions in sound transmission and sound reflection. The mat is bound together through a blend of polymer adhesives, which provide a tough durable mat with water repellant features. Acousti-Mat LPR is now ALWAYS a "Green" building material with 40% pre-consumer recycled content.

Maxxon® CSM
When project conditions require reinforcement of the underlayment, New Maxxon CSM provides a cost-effective alternative to metal lath. Maxxon CSM is a "green" building material with 40% pre-consumer recycled content.

Maxxon® DPM
Maxxon DPM (Damp Proof Membrane) is a unique 2-component, moisture tolerant, high density, chemically enhanced epoxy product which prevents the passage of water vapor and moisture through concrete floors and walls on or below grade.

Mer-Krete^TM Fracture Guard 5000
Mer-Krete^TM Fracture Guard 5000  is a one step mold resistant anti-fracture membrane. Fracture-Guard 5000 may be installed over any sound Maxxon approved underlayment to receive ceramic, quarry, porcelain and stone tiles and is ideal for residential and commercial applications.  When installed in accordance with manufacturer's specifications, Fracture-Guard 5000 will inhibit cracking.